Providing support for quality indicators when adjusting rotational speed of the diesel generator shaft
Article Sidebar
Main Article Content
Abstract
The subject of the study in the article is an analysis of ways and means to improve the accuracy of the rotation frequency, ensuring the stability and speed of the processes of speed control, increasing the reliability of the regulators that are used in automatic frequency control systems. The purpose is to describe the technical solutions proposed by the authors, the using of which will avoid the negative impact of changes in the physical properties of the working mixture used in regulators of indirect action. The task is justification of technical solutions, the introduction of which, in the practice of adjusting the rotational speed of the shaft of the diesel generator, will: increase the accuracy of the required values of the speed of rotation; ensure the necessary stability of the automatic frequency control system; to increase the speed of the regulatory processes; increase reliability of regulators; to eliminate the negative effect on the process of regulating the frequency of changes in the physical properties of working mixtures, are used in regulators of indirect action. Conclusion: the proposed technical solutions should be used both in the modernization of existing automatic speed control systems and in the construction of frequency control systems for new sources of electric energy.
Article Details
References
Kononov, B.T., Samoylenko, B.F. and Kononov, V. B. (2007), Relay protection and automatics in power supply systems of military objects, KNAFU, Kharkiv, 384 p.
Zakladnyj, O.M., Prahovnyk, L.V. and Solovey, О.І. (2005), Energy saving by means of industrial electric drive tutorial, Кondor, Kyiv, 408 p.
Metelskiy, V.P. (2010), Electric machines and micromachines, ZNTU, Zaporizhzhya, 660 p.
Andrienko, V.М. and Кueva, V.P. (2011), Electric machines, NUHT, Kyiv, 366 p.
Yatsun, М.А. (2011), Electric machines, Polytechnic Publishing House, Lviv, 366 p.
Belikova, L.Y. and Shevchenko, V.P. (2012), Electric machines, Science and Techniques, Odesa, 478 p.
Buryak, V.N. (2012), Operation of power supply system, KNUCH, Kharkiv, 431 p.
Кononov, B.Т., Sakhno, А.V. and Sulema D.V. (2009), “The frequency controller of the electric machine converter DC to AC”, Collection of scientific works, No. 3 (11), KNAFU, Kharkiv, pp. 82-84.
Коnonov, B.Т. (2011), “Equalization of frequencies during synchronization of a synchronous generator”. Navigation and communication control systems, Collection of scientific works, No. 3 (19), pp. 77-80.
Коnonov, B.Т. and Мusharov, А.О. (2013), “Investigation of the stability of transient processes in electric circuits with fer-roresonance”, Nunciate NTU «KPІ», Collection of scientific works, Тhematic issue. Problems of improvement of electric ma-chines and apparatuses, NTU «KPІ», Kharkiv, No. 51 (1024), pp. 82-90.
Коnonov, B.Т. and Мusharov, А.О (2013), “Investigation of the stability of ferro-resonance systems”, Science and techniques of Air Force of Armed forces of Ukraine, No. 4 (13), Kharkiv, pp. 208-209.
Коnonov, B.Т. and Bachu, R.І. (2013), “Improved accuracy in determining the degree of unevenness of the diesel engine's rotational speed”, Arms and military equipment systems, No. 2 (34), Kharkiv, pp. 104-106.
Коnonov, B.Т., Ryabuha, N.М. and Scheka, V.М. (2013), “Quality management of electric energy”, Information processing systems, No. 3 (36), KNAFU, Kharkiv, pp. 158-167.