DEPENDENCE OF PARAMETERS OF REPAIR OF MILITARY COMMUNICATION MEANS ON THE QUALITY OF METROLOGICAL SUPPORT
Article Sidebar
Main Article Content
Abstract
The article proposes an approach to the quantitative assessment of the effect of metrological reliability of measuring equipment on the time of the verification of the parameters of military communications means during its maintenance and current repairs. In known works, approximate values of the probability of failure-free operation of measuring instruments are used for this, which reduces the accuracy of the results obtained. In the field conditions, it is necessary to take into account the metrological reliability of measuring instrument, which depends on temperature, humidity, vibration loads and other factors. The time for determination of the technical state of military communications means is regulated by guidance documents, therefore it is necessary to take into account all factors influencing the values of maintainability indicators in order to plan efficient work of specialists during its technical maintenance and routine maintenance in the process of developing metrological and diagnostic support. It is suggested to use the functional dependencies of the average recovery time of military communications equipment on the quality indicators of metrological and diagnostic support. Examples are given of using the results of the study to quantify the maintainability of real samples of military communications means and show the gain in the accuracy of calculating the average recovery time. The received results allow to estimate more objectively time of performance of works and reasonably to choose measuring instruments more objectively.
Article Details
References
Ksenz, S.P. (1989), Diagnostics and maintainability of radio-electronic means, Radio and communication, Moscow, 248 p.,
Sakovich, L.N. Dzyuba, V.N. and Pavlov V.P. (2003), “Definition of metrological characteristics of measuring instruments for maintenance and repair of communication equipment”, Communication, No. 5, pp. 17-19.
Ryzhov, Ye. and Sacovych L. (2017), “Minimization measurement requirements for maintenance and repair special communica-tion means”, Information Technology and Security, Institute of Special Communication and Information Protection National Technical University of Ukraine (Igor Sikorsky Kyiv Polytechnic Institute), Kyiv, Vol. 5, Iss. 1(8), pp. 106-114.
Ryzhov, Ye.V. and Yakovlev, M.Yu. (2015), “Methodology of substantiation of metrological characteristics of military equipment measuring equipment for metrological maintenance of military communication technique”, Prospects for the Development of Arms and Military Equipment of the Land Forces : abstracts of the reports of the International Scientific and Technical Conference, LFA, Lviv, pp. 166-167.
Pavlov, V.P. (2006), Methods of defectation of military communication means during unplanned repairs, diss. PhD (technical sciences) : 20.02.14, Kyiv, 182 p.
Kim, K.K. (2008), Metrology, standardization, certification and electrical measuring equipment, Peter, St. Petersburg, 368 p.
Yakovlev M.Yu. (2011), Development of the theory of metrological reliability of means of measuring equipment for military use : author's abstract, diss. PhD (technical sciences) : special 05.01.02 – standardization, certification and metrological support, Lviv, 39 p.
Kononov, V.B. (2011), “Determination of inter-verification (calibration) intervals of measuring equipment for military use”, Aviation-space technology and technology, No. 7, pp. 235–237.
.Kononov, V.B., Vodolazhko, O.V. and Koval O.V. (2017), Fundamentals of operation of measuring instruments for military purposes under the conditions of ATO, KhNUPS, Kharkiv, 288 p.
Yakovlev, M.Yu., Ryzhov, Ye.V., Sakovich, L.M. and Arkushenko P.L. (2017), “Improvement of the method of task requirements to the minimum acceptable value of the probability of correct estimation of the result of the verification during the diagnosis”, Science and technology of the Air Forces of the Armed Forces of Ukraine, No. 4 (29), pp. 136-142.
Ryzhov, Ye. and Sacovych, L. (2017), “Method substantiation of minimally possible value of probability assessment of esti-mation result of parameters”, Bulletin of National Technical University of Ukraine "Kyiv Polytechnic Institute". Series In-strument Making, No. 54(2), pp. 96-106, doi: https://doi.org/10.20535/1970.54(2).2017.119562.
Tsybyna, A.A. and Sholov, A.M. (2008), “Experience in introducing on-computer methods for establishing inter-checkpoints”, Measuring technique, No. 1, pp. 16-17.
Sakovich, L.M. and Girenko I.M. (2017), “Modeling of hardware technical support”, Modern information technologies in the field of security and defense, Kyiv, No. 1 (28), pp. 47-52.
Shortwave radio station R-1150 Operating manual AANZ.464414.001 RE, Telecard-Device, Odesa, 205 p.