METHOD FOR THE CONTROL VERIFICATION OF DIGITAL INFORMATION, REPRESENTED IN A RESIDUE NUMBER SYSTEM

Article Sidebar

PDF
DOI: https://doi.org/10.20998/2522-9052.2020.2.22
Keywords:
control system of information, data transmission and processing system, nulevization of number, residue number system

Main Article Content

Victor Krasnobayev
V. N. Karazin Kharkiv National University, Kharkiv
https://orcid.org/0000-0001-5192-9918
Alina Yanko
National University «Yuri Kondratyuk Poltava Polytechnic», Poltava
https://orcid.org/0000-0003-2876-9316
Serhii Tur
National University «Yuri Kondratyuk Poltava Polytechnic», Poltava
https://orcid.org/0000-0003-0670-1206

Abstract

The subject of the research in the article is the control methods for the data presented in the residue number system. The object of research is the process of monitoring data presented in the residue number system. The purpose of the work is to develop a method for increasing the reliability of control of data presented in the residue number system. The following tasks are solved in the article: research of data control methods presented in the residue number system; development of a method for increasing the reliability of data control; consideration of examples of application of the developed method for a specific residue number system; demonstration of examples of calculation and comparative analysis of the reliability of data control presented in the residue number system. The following research methods are used: the basics of system analysis and the basics of machine arithmetic in the residue number system. The following results were obtained: A method for increasing the reliability of data control was developed; examples of application of the developed method for a specific residue number system are presented; examples of calculation and comparative analysis of the reliability of data control presented in the residue number system are given. Conclusions: This article presents the theoretical foundations of the process of increasing the reliability of control of data presented in the residue number system, based on the use of the procedure of zeroing numbers. A method for increasing the reliability of data control has been directly developed and presented. Examples of application of the developed method for a specific residue number system are given and examples of calculating the reliability of control of data presented in the residue number system are given. A method has been developed to increase the reliability of data control; it is a definite contribution to the theory of noise-resistant coding in a residue number system. Examples of calculation and comparative analysis of the reliability of data control confirm the practical significance of the results of this article.

Article Details

How to Cite
Krasnobayev, V., Yanko, A., & Tur, S. (2020). METHOD FOR THE CONTROL VERIFICATION OF DIGITAL INFORMATION, REPRESENTED IN A RESIDUE NUMBER SYSTEM. Advanced Information Systems, 4(2), 148–155. https://doi.org/10.20998/2522-9052.2020.2.22
Issue
Vol. 4 No. 2 (2020): Advanced Information Systems
Section
Applied problems of information systems operation
Author Biographies

Victor Krasnobayev, V. N. Karazin Kharkiv National University, Kharkiv

Doctor of Technical Sciences, Professor, Professor of the Department of Electronics and Control Systems

Alina Yanko, National University «Yuri Kondratyuk Poltava Polytechnic», Poltava

Candidate of Technical Sciences, Associate Professor of the Department of Computer and Information Technologies and Systems

Serhii Tur, National University «Yuri Kondratyuk Poltava Polytechnic», Poltava

student majoring in "Telecommunications and Radio Engineering" of the Department of Automation, Electronics and Telecommunications

References

Shu, S., Wang, Y. and Wang, Y. (2016), “A research of architecture-based reliability with fault propagation for software-intensive systems”, 2016 Annual Reliability and Maintainability Symposium (RAMS), Tucson, AZ, pp. 1-6.

Ponochovniy, Y., Bulba, E., Yanko, A., Hozbenko, E. (2018), “Influence of diagnostics errors on safety: Indicators and requirements. 2018 IEEE 9th International Conference on Dependable Systems, Services and Technologies (DESSERT). DOI: https://doi.org/10.1109/dessert.2018.8409098

Akushskiy, I. Ya., Yuditskiy, D. I. (1968), Machine arithmetic in residual classes, M., Radio i svyaz, 444 p.

Torgashev, V. A. (1973), System of residual classes and reliability of digital computers, M., Sov. radio, 118 p.

Amerbaev, V. M. (1976), Theoretical Foundations of Machine Arithmetic, Alma-Ata, Nauka, 324 p.

Krasnobayev, V., Kuznetsov, A., Koshman, S. and Moroz, S. (2018), “Improved Method of Determining the Alternative Set of Numbers in Residue Number System”, In: Chertov O., Mylovanov T., Kondratenko Y., Kacprzyk J., Kreinovich V., Stefanuk V. (eds) Recent Developments in Data Science and Intelligent Analysis of Information. ICDSIAI 2018. Advances in Intelligent Systems and Computing, vol 836. Springer, Cham, pp. 319-328. DOI:

https://doi.org/10.1007/978-3-319-97885-7_31

Krasnobayev, V.A., Yanko, A.S. and Koshman, S.A. (2016), “A Method for arithmetic comparison of data represented in a residue number system” Cybernetics and Systems Analysis, vol. 52, issue 1, pp. 145-150. DOI:

https://doi.org/10.1007/s10559-016-9809-2

Krasnobayev, V., Koshman, S. and Mavrina, M. (2013), “Method for correcting one-time data errors represented by a deduction class code”, Elektronnoe modelirovanie, vol. 75, issue 5, pp. 43-56.

Fan, C. and Ge, G. (2014) "A Unified Approach to Whiteman's and Ding-Helleseth's Generalized Cyclotomy Over Residue Class Rings,", IEEE Transactions on Information Theory, vol. 60, no. 2, pp. 1326-1336, DOI:

https://doi.org/10.1109/TIT.2013.2290694

Krasnobayev, V.A., Koshman, S.A. and Mavrina, M.A. (2014), “A Method for Increasing the Reliability of Verification of Data Represented in a Residue Number System”, Cybernetics and Systems Analysis, vol. 50, issue 6, pp. 969–976.

Yanko, A., Koshman, S. and Krasnobayev, V. (2017), “Algorithms of data processing in the residual classes system”, 4th International Scientific-Practical Conference Problems of Infocommunications. Science and Technology (PIC S&T), Kharkiv, pp. 117-121, DOI: https://doi.org/10.1109/infocommst.2017.8246363

Krasnobaev, V. A. (1990), Methods to improve the reliability of specialized computer systems and communications, Kharkiv, HVVKIU RV, 172 p.

Krasnobayev, V., Koshman, S., Yanko, A. and Martynenko, A. (2018), “Method of Error Control of the Information Presented in the Modular Number System”, 2018 International Scientific-Practical Conference Problems of Infocommunications. Science and Technology (PIC S&T). IEEE (2018), DOI:

https://doi.org/10.1109/infocommst.2018.863204

Krasnobayev, V., Kuznetsov, A., Kononchenko, A. and Kuznetsova, T. (2019), “Method of data control in the residue classes”, Second International Workshop on Computer Modeling and Intelligent Systems (CMIS-2019). Zaporizhzhia, Ukraine, pp. 241–252.

(2017) Security and noise immunity of telecommunication systems: new solutions to the codes and signals design problem. Collective monograph. Edited by Ivan D. Gorbenko and Alexandr A. Kuznetsov: ASC Academic Publishing, Minden, Nevada, USA, 198 p.

Kasianchuk, M., Yakymenko, I., Pazdriy, I. and Zastavnyy, O. (2015), “Algorithms of findings of perfect shape modules of remaining classes system”, The Experience of Designing and Application of CAD Systems in Microelectronics.

Krasnobaev, V. A., Koshman, S. A., Moroz, S. A., Kurchanov, V. N. and Yanko, A. S. (2017), Models and methods of data processing in the system of residual classes, Monografiya, Harkov, OOO "V dele", 197 c.

(2017) ISCI’2017: Information Security in Critical Infrastructures. Collective monograph. Edited by Ivan D. Gorbenko and Alexandr A. Kuznetsov: LAP Lambert Academic Publishing, OmniScriptum GmbH & Co. KG, Germany, 216 p.