Estimation of influence of the metrology and diagnostic providing on technical service on the state communication means

Article Sidebar

PDF (Українська)
Published: Jun 22, 2021
DOI: https://doi.org/10.20998/2522-9052.2021.2.17
Keywords:
technical service on the state

Main Article Content

Lev Sakovych
Institute of Specialized Communication and Information Security, NTUU “Igor Sikorsky KPI”, Kyiv
Heorhii Krykhovetskyi
Institute of Specialized Communication and Information Security, National Technical University of Ukraine “Igor Sikorsky KPI”, Kyiv
Oleksandr Mikhin
Institute of Specialized Communication and Information Security, National Technical University of Ukraine “Igor Sikorsky KPI”, Kyiv
Iurii Myroshnychenko
Institute of Specialized Communication and Information Security, National Technical University of Ukraine “Igor Sikorsky KPI”, Kyiv

Abstract

The purpose of the article is to quantify the impact of the quality of metrological and diagnostic software on the formation of the sequence and limit the number of inspections during maintenance of complex electronic systems, including modern means of communication with digital information processing. As a result of the analysis of the existing system of maintenance the advantages of service of products on a condition are established. In this case, to determine the sequence of inspections do not fully take into account the properties of metrological and diagnostic software. Results of the research. In the article the quantitative estimation of influence of the metrology and diagnostic providing is first considered and got on the indexes of quality of technical maintenance of communication means. It is shown that most influence in a time of implementation of technical service and probability of determination here of the technical state render the diagnostic providing of works with the use of the modern metrology providing. It is also shown that on the value of indexes of quality of technical service preparation of specialists and technological equipment of repair organ influence substantially, abilities of performers in full to use possibilities of modern facilities of measuring technique. Conclusion. The got results it is expedient to draw on at the improvement of existing or creation of new instructions of technical service on the state perspective communication or other difficult wares of the radio electronic systems means.

Article Details

How to Cite
Sakovych, L., Krykhovetskyi, H., Mikhin, O., & Myroshnychenko, I. (2021). Estimation of influence of the metrology and diagnostic providing on technical service on the state communication means. Advanced Information Systems, 5(2), 120–125. https://doi.org/10.20998/2522-9052.2021.2.17
Issue
Vol. 5 No. 2 (2021): Advanced Information Systems
Section
Information systems research
Author Biographies

Lev Sakovych, Institute of Specialized Communication and Information Security, NTUU “Igor Sikorsky KPI”, Kyiv

Candidate of Technical Sciences, Associate Professor, Associate Professor of the Department

Heorhii Krykhovetskyi, Institute of Specialized Communication and Information Security, National Technical University of Ukraine “Igor Sikorsky KPI”, Kyiv

Candidate of Technical Sciences, Senior Researcher, Head of Department

Oleksandr Mikhin, Institute of Specialized Communication and Information Security, National Technical University of Ukraine “Igor Sikorsky KPI”, Kyiv

Senior Lecturer of the Department

Iurii Myroshnychenko, Institute of Specialized Communication and Information Security, National Technical University of Ukraine “Igor Sikorsky KPI”, Kyiv

postgraduate student

References

(2014), Law of Ukraine “On Metrology and Metrological Activity” of June 5, 2014, No. 1314-VII.

Barzilovich, E.Yu. (1982), Models of maintenance of complex systems, Vysshaya Shkola, Moscow, 231 p.

Vasilishin, V.I., Zhenzhera, S.V., Chechuy, O.V. and Glushko, A.P. (2018), Fundamentals of the theory of reliability and operation of electronic systems, KhNUPS, Kharkiv, 268 p.

Sakovich, L.M. and Bobro, R.A. (2006), “The choice of parameters and the sequence of their measurement during the technical maintenance of communication facilities by condition,” Zvyazok, No. 3, pp. 54-56.

Ksenz, S.P., Volynsky, A.A. and Klimentov, V.I. (1990), Theoretical and Applied Problems of Diagnostics of Communication and Automation Means, VAS, Leningrad, 336 p.

Ksenz, S.P., Poltarzhitsky, M.I., Alekseev, S.P. and Mineev, V.V. (2010), Fighting Diagnostic Errors in the Maintenance and Repair of Communication and Navigation Control Systems, VAS, St. Petersburg, 240 p.

Kononov, V.B., Vodolazhko, O.V. and Koval, O.V. (2017), Fundamentals of operation of measuring equipment for military purposes in the conditions of anti-terrorist operation, KhNUPS, Kharkiv, 288 p.

Kononov, V., Ryzhov, Ye and Sakovych, L. (2017), “Dependence of parameters of repair of military communication means on the quality of metrological support”, Advanced Information Systems, Vol. 2, No. 1, pp. 91-95, DOI:

http//doi.org/10.20998/2522-9052.2018.1.17.

Sakovych, L., Ryzhov, Ye and Sobolev, A. (2019), “Method of time distribution for repair of radio electronic means wish multiple defects”, Military Technical Collection, No. 21, pp. 72-77.

Ryzhov, EV and Sakovich, L.M. (2018), “Assessment of the impact of metrological reliability of measuring equipment on maintainability indicators”, Weapons and Military Equipment, No. 2 (18), pp. 58–61, DOI: http//doi.org/10.34169/2414-0651.2018.2(18).58-61

Ryzhov, EV and Sakovich, L.M. (2017), “Method of determining the sequence of checking the parameters during the maintenance”, Weapons and Military Equipment, No. 4 (16), pp. 70-72. DOI: https//doi.org/10.34169/2414-0651.2017.4(16).70-72.

Hnatyuk, S.E., Sakovich, L.M. and Miroshnichenko, Yu.V. (2020), “Modeling of the procedure for checking the parameters for maintenance of electronic devices”, Electronic modeling, vol. 42, no. 5, pp. 120-128.